Clothes Dryer Thermal Fuse / Temperature Sensor For Drinking Machine
उत्पाद विवरण:
उत्पत्ति के प्लेस: | Dongguan,Guangdong,China |
ब्रांड नाम: | UCHI |
प्रमाणन: | UL,VDE,SGS,ROHS |
मॉडल संख्या: | KSD |
भुगतान & नौवहन नियमों:
न्यूनतम आदेश मात्रा: | 5000PCS |
---|---|
मूल्य: | Negotiable |
पैकेजिंग विवरण: | Bulk |
प्रसव के समय: | 7 days |
भुगतान शर्तें: | T/T,Paypal,Western Union,Money gram |
आपूर्ति की क्षमता: | 5000,000,000PCS Per Month |
विस्तार जानकारी |
|||
हाई लाइट: | high temperature fuse,thermal cutoff resistor |
---|
उत्पाद विवरण
Clothes Dryer Thermal Fuse / Temperature Sensor For Drinking Machine
Quick Details
Use dish-like double metal sheet as temperature sensor, when temperature raise to a certain level, the sheet jumps, the contactor will act swiftly to cut the electricity, when temperature drop to certain level, the sheet reposition and the pin come back to the status before, by this theory, it can control switch the power. This product has the advantages of small size, lightweight, no arcing, high reliability, long life-spin and less disturb to wireless.
Thermal fuses, defined as non-resettable, are single action devices that are widely used for the electrical equipments against over temperature. The thermal cutoffs are composed of the fusible alloy with low melting point and special resin, encapsulated in a plastic or ceramic housing. Under normal operated, the fusible alloy is joined by the two lead wires within the housing. When the thermal cutoff senses an abnormal heat and reach a preset temperature, the fusible alloy melts and disconnects the circuit completely with the aid of the special resin. Both Axial and Radial shapes are available, with rated current from 1A to 200A, Function temperature 76℃~221℃, certificated including UL, cUL, VDE,TUV,PSE, KTL, CCC and RoHS, REACH Compliant.
Used for electric appliances such as drinking machine, electric boiler, disinfector, coffee shell, electric iron, clothes dryer and dust collector.
Standard Temperature(TF℃) |
Disconnect Temperature(℃) |
Repositing Temperature(℃) |
Rating Voltage(V) |
Rating Current(A) |
45 |
45±5 |
|
250 |
5A-10A-15A |
50 |
50±6 |
250 |
5A-10A-15A |
|
55 |
55±5 |
TF- |
250 |
5A-10A-15A |
60 |
60±5 |
5-25±℃ |
250 |
5A-10A-15A |
65 |
65±5 |
|
250 |
5A-10A-15A |
70 |
70±5 |
±5℃ |
250 |
5A-10A-15A |
75 |
75±5 |
|
250 |
5A-10A-15A |
80 |
80±5 |
250 |
5A-10A-15A |
|
85 |
85±5 |
250 |
5A-10A-15A |
|
90 |
90±5 |
250 |
5A-10A-15A |
|
95 |
95±5 |
250 |
5A-10A-15A |
|
100 |
100±5 |
250 |
5A-10A-15A |
|
105 |
105±5 |
250 |
5A-10A-15A |
|
110 |
110±5 |
250 |
5A-10A-15A |
|
115 |
115±5 |
250 |
5A-10A-15A |
|
120 |
120±5 |
250 |
5A-10A-15A |
|
125 |
125±5 |
250 |
5A-10A-15A |
|
130 |
130±5 |
250 |
5A-10A-15A |
|
135 |
135±5 |
250 |
5A-10A-15A |
|
140 |
140±5 |
250 |
5A-10A-15A |
|
145 |
145±5 |
250 |
5A-10A-15A |
|
150 |
150±5 |
250 |
5A-10A-15A |
|
155 |
155±5 |
250 |
5A-10A-15A |
|
160 |
160±5 |
250 |
5A-10A-15A |
|
165 |
165±5 |
250 |
5A-10A-15A |
|
170 |
170±5 |
250 |
5A-10A-15A |
|
175 |
175±5 |
250 |
5A-10A-15A |
|
180 |
180±5 |
250 |
5A-10A-15A |
|
|
|
250 |
5A-10A-15A |
1. Disconnect Temperature: tolerance can be set according to customer’s request. ±2℃,±3℃,±5℃
2.Life-span: within rated load≥20000 cycles
3.Normal electric intensity: 50Hz 2000V, 1m non-latch out or flash circuit
4.Contact resistance:≤50mΩ
5.Insulation resistance:>100 MΩ
6.Contacting way: usually open or close.
7.shell protection level: IP20
8.Grounded: To connect temperature controller metal shell with 4pcs grounded metal parts, mensuration of temperature must be taken according to the features of the product to set up monitoring temperature. When install, the cover of temperature controller should be stick with the surface of the machine that need to be detected, and to put thermal conducting silica gel or similar thermal conducting material on the inducting surface, please don’t break the cover or distort it, these actions will change the temperature or affect its performance. Please don’t lead electric gas or any material into the inside or surface of the temperature controller, this will even affect the insulation ability of the controller.
1. Factory supply directly
2. Completed certificates such as UL,VDE,SGS,etc and high quality available
3. Quick delivery
4. Best after-sales services
5. OEM & ODM available